Canon PowerShot G1 X User Manual page 161

• Editing is not possible for images saved as
• RAW images cannot be edited.
• Images cannot be resized to a higher resolution.
Cropping
You can specify a portion of an image to save as a separate image file.
Cropping Area
Resolution After Cropping
Preview of Image
After Cropping
Choose [Trimming].
Press the n button, and then choose
[Trimming] on the 1 tab (p. 41).
Choose an image.
Press the qr buttons or turn the 7 dial to
choose an image, and then press the m
button.
Adjust the cropping area.
A frame is displayed around the portion of the
image to be cropped.
The original image is shown in the upper left,
and a preview of the image as cropped is
shown in the lower right.
To resize the frame, move the zoom lever.
To move the frame, press the opqr buttons.
To change the frame orientation, press the
m button.
Faces detected in the image are shown with
gray frames around them (in the upper-left
image), which can be used for cropping.
Switch between frames as needed by turning
the 7 dial.
Press the n button.
Save as a new image and review.
Follow steps 4 – 5 on p. 160.
Editing Still Images
in step 3.
161