Adjusting Basic Camera Functions
Date and Time
Adjust the date and time as follows.
Metric/Non-Metric Display
Change the unit of measurement shown in the MF indicator (p. 106) and
zoom bar (p. 44) from m/cm to ft/in as needed.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines (p. 128) to help you level
the camera in advance.
176
Access the [Date/Time] screen.
Choose [Date/Time], and then press the m
button.
Configure the setting.
Press the qr buttons to choose an item, and
then adjust the setting, either by pressing the
op buttons or turning the 7 dial.
Choose [Distance Units], and then choose [ft/
in].
Level the camera.
Mount the camera on a tripod and make sure
it is level.