Canon PowerShot G1 X User Manual page 131

Assigning Functions to the
• To restore default settings, choose
• Icons labeled with
shooting mode or under current function conditions.
• When the or
balance data (p. 101), and the white balance settings change to
When the % function is used, each press of the
•
the focus, and % is displayed on the screen.
• Pressing the
display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
- Open and close the screen
- Raise and lower the flash
Access the setting screen.
Press the n button, choose [Set Shortcut
button] on the 4 tab, and then press the m
button (p. 41).
Configure the setting.
Press the opqr buttons or turn the 7 dial
to choose a function to assign, and then
press the m button.
Use the assigned function as
needed.
Press the
function.
indicate that the function is not available in the current
function is used, each press of the
button when the
Customization for Shooting Styles
Still Images
Button
button to activate the assigned
.
button adjusts and locks
function is used deactivates screen
Movies
button records white
or .
131