Nice NX STAR MB 534 SH Instructions And Warnings For Installation And Use
Tubular motors
Hide thumbs
Also See for NX STAR MB 534 SH:
- Instructions and warnings for installation and use (28 pages) ,
- Quick manual (2 pages) ,
- Quick manual (2 pages)
Related Manuals for Nice NX STAR MB 534 SH
Summary of Contents for Nice NX STAR MB 534 SH
- Page 1 Nice NX STAR MB 534 SH NX STAR MB 1020 SH Tubular motors EN - Instructions and warnings for installation and use...
-
Page 2: Installation Warnings
GENERAL WARNINGS: SAFETY - INSTALLATION - USE (original instructions in Italian) ATTENTION Important safety instructions. Follow all instructions as improper installation may cause serious damage ATTENTION Important safety instructions. It is important for you to comply with these instructions for your own and other people’s safety. -
Page 3: Product Description And Intended Use
“Guide to Selection” section, in the “Nice Screen” catalogue, – also available on the • The motor must be powered by a permanent connection to the mains. -
Page 4: Programming And Adjustments
Brown and Black wires. – All the programming and adjustment operations must be carried out with the Nice (*) Note – When the Up and Down limit switches have not yet been programmed, TTU programmer (Fig. 5). Alternatively you can also use a two-button push button... - Page 5 A.1 - MANUAL programming of the UP (“0”) and DOWN (“1”) limit switches NOTES AND WARNINGS • This procedure is obligatory only for roller shutters without a mechanical stop. • Programme the UP limit switch (0) FIRST. • the down limit switch (1) is NOT memorised if it is within 120° with respect to the UP limit switch (0) •...
- Page 6 Note: • All technical specifications stated herein refer to an ambient temperature of 20° C (± 5° C). • Nice S.p.A. reserves the right to apply modifications to products at any time when deemed necessary, maintaining the same intended use and func- tionality.
- Page 7 Appendix Limit switch gear wheel (not included). Drive wheel (not included).
- Page 8 Cap for fixing the roller to the bracket (not included). Removing the connector if necessary 10 mm Support for fixing the motor head.
- Page 10 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...