Agp Driver For Win95 Installation; Requirement; Installation Procedure - SOLTEK SL-55B5 Manual

Note: 1. Refer to the table above to choose the correct
voltage for the CPU everytime that you install a
CPU.
2. Make sure that your JP1 is matched with the
CPU voltage, otherwise will damage the CPU or
make the system unstable.
3. When the new CPU is announced and is not
listed on this manual, please refer to the above
table, select the correct voltage setting for it.

AGP Driver for Win95 Installation

Requirement

¥ Microsoft Windows95OSR2.1 (OSR2.0 with USB upgrade)
¥ Apollo VP3 AGP VxD Driver
¥ AGP VGA Card with Driver
¥ DirectX 5.0 DDK or SDK

Installation Procedure

Step1 Go to the next step if you are running
Win95OSR2.0/2.1, and if not, install Windows95
4.00.950B or later version
Step2 Install USBSUBB.EXE program (USB upgrade)
Step3 Install Apollo VP3 AGP VxD Driver, run
ÒSETUP.EXEÓ program
Step4 Install AGP driver for Windows95
Step5 Install Microsoft DirectX 5.0 DDK or SDK
To make sure if the Apollo VP3 AGP driver is properly
installed, boot up the system and run the ÒRegeditÓ to check
if the following path with VIAGARTD exists:
ÒHKEY_LOCAL_MACHINES\System\CurrentControlSet\
Services\VxDÓ.
Hardware Installation 5