Canon S400 User Manual page 52

3 Load the Back Print Film:
• With the print (matte) side facing up, place one sheet of plain paper
• Adjust the paper guide to the left side of the stack.
Note
You can load up to ten sheets of film in the auto sheet feeder.
4
Windows
Open the Printer Properties dialog box, then select the most appropriate
icon in the Choose Print Mode box under the Main tab. Select Back Print
Film in the Media Type box. Also make sure that the BJ Cartridge setting
matches the BJ cartridge installed in the printer.
Change the settings if necessary.
under the stack. Load the stack with the edges aligned against the
right side of the sheet feeder.
Print side
Using the Windows 98/95 Printer Driver
Printing on Special Media Types
Plain paper
Print side
Paper Handling 52