Canon S400 User Manual page 316

Check 4
A
RE YOU EXECUTING A HIGH
If you execute a high-density print job on plain paper, the paper may absorb
too much ink and curl, and the print heads may scratch the surface of the
curled page. Lower the Intensity setting.
Windows
Open the Printer Properties dialog box, and click the Advanced button in
1
the Main tab.
Click the Color tab.
2
Use the Intensity slide bar to change the print density setting.
3
Check 5
A
RE YOU PRINTING OUTSIDE THE RECOMMENDED PRINTING AREA
If you print outside the recommended printing area, the print heads may
scratch the bottom edge of the page. To avoid problems, print only in the
recommended printing area.
When you print on High Gloss Photo Film or Back Print Film, the bottom
Note
margin must be larger than 1.02 in. (26 mm).
-
DENSITY PRINT ON PLAIN PAPER
Printing Area
Printout Is Unsatisfactory
?
?
Troubleshooting 316