Closing the Printer Properties Dialog Box
After specifying the necessary print settings, close the Printer Properties dialog box and
start your print job.
Make sure that the information on Direction, Feed, and Paper Thickness
1
Lever in the illustrated guideline is correct.
Click the OK button. The print settings become enabled and the Printer
2
Properties dialog box closes.
Note
• When you want to enable the print settings without closing the Printer
Properties dialog box, click the Apply button.
• When you do not want to enable the print settings, click the Cancel
button.
• When you want to revert the print settings to the factory settings, click
the Defaults button in each tab.
Getting to Know the Windows 98/95 Printer Driver
Using the Windows 98/95 Printer Driver
115