Boot Menu - Panasonic CF-18 Series Reference Manual

Setup Utility

Boot Menu

*1*2
Floppy Drive
*2
+Hard Disk Drive
*3
USB CD/DVD Drive
*4
LAN
*1
This is displayed even if a floppy disk drive is not connected or [Legacy USB Support] is set to [Dis-
able] on [Advanced] menu.
The following drive can be used for startup (recommended).
Panasonic USB floppy disk drive (optional. CF-VFDU03)
*2
"+" is displayed if the device that can be used for startup is connected. Pressing
collapses devices with a - or +. Pressing
*3
This is displayed even if a CD/DVD drive is not connected or [Legacy USB Support] is se to [Dis-
able] on [Advanced] menu.
*4
This is displayed even if [LAN] is set to [Disable] on [Advanced] menu.
The default order is as follows:
[Floppy Drive] -> [Hard Disk Drive] -> [USB CD/DVD Drive] -> [LAN].
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
F5.
NOTE
[Boot] menu cannot be changed when the Setup Utility is started up with the User
Password.
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on, and Esc is pressed at [Panasonic] boot
screen, [Boot Menu] (the device selection screen) will appear. When the setting of
[Boot] menu is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in [Security] menu is set to [Enable].
Ctrl Enter
+ expands all the devices.
85
Enter
expands or
, and then press F6.
and
and , and then press