Canon imagePROGRAF iPF8300 Basic Guide No.1 Basic Manual page 28

Replacing Ink Tanks
3
Press the OK button and insert the Ink Tank into the
holder with the ink hole facing down, as shown.
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink Tank does not fi t in the holder, do not force it into the holder. Make sure the color of the Ink
Tank Lock Lever matches the color of the Ink Tank , and check the orientation of the Ink Tank before
reloading it.
4
Lift the Ink Tank Lock Lever until it stops, and then push
it down until it clicks into place.
28
330 ml tanks
700 ml tanks
330 ml tanks
700 ml tanks