Advertisement
Eliza Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
dowel
long
bolt
x12
screw
x16
x6
H
I
slide
slide
Allen
rail x2
rail x2
key x1
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
locking
screw
nut x16
x20
K
L
J
handle
bolt
x2
x20
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
F
G
slide
slide
rail x2
rail x2
M
N
height
screw
x10
adjuster x1
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Eliza Coffee Table
Summary of Contents for Mocka Eliza Coffee Table
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Insert 6x bolts (C) into panel [1] as shown. Tighten with a screwdriver. Attach 2x slide rails (F) and 2x slide rails (G) to panels [3] and [5] as shown and secure with 8x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 6x locking nuts (D). Tighten with a screwdriver. as shown. Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and secure with 6x long screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 20x bolts (L). Tighten with an Allen Key (J). Screw the height adjuster (N) screwdriver. Attach panels [8], [9] and [13] to front panel [7]/[12] onto the support leg [15] as shown. and secure with 5x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Secure with 4x screws (E) and tighten with a [11] as shown using 5x screws (M). Tighten with a screwdriver. screwdriver. Attach handle (K) to panel [7]/[12] secure with 2x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Once assembled lift furniture into place, do not drag. Ensure unit is balanced as shown. Ensure the drawers slide easily along the rails. and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Eliza Coffee Table and is the answer not in the manual?
Questions and answers