Page 1
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2
Attach 2x slide rails (F) and 2x slide rails (G) to panels [4] and [5] as shown Attach panels [3] and [5] to panel [6] with 4x dowels (A). and secure with 12x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
Eliza Entertainment Unit Assembly Instructions Attach panels [4] and [5] to panel [6] with 4x dowels (A). Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
6x locking nuts (D). Tighten with a screwdriver. Secure 2x panels [6] [5], to form the back of the unit as shown. to panel [1] with 4x long screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Attach 4x legs [8] and support leg [17] to panel [2] and secure with 20x bolts (L). Tighten with an Allen Key (N). Insert the adjuster (R) into the secure with 6x long screws (B). Tighten with a screwdriver. middle support leg as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
1x handle (O) to panel [9] securing with 2x screws (E). 2x hinges (P) to panel 3, and secure with 8x hinge screws (S) as Tighten with a screwdriver. shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
Insert panel [10] and balance on top of the plugs. Attach panels [12], [13] and [14] to panel [11] and secure with 5x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 8
Secure with 4x screws (E) and tighten with a screwdriver. [13], [14] and [16] as shown using 5x screws (M). Attach handle (O) to panel [11] secure with 2x screws (E). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 9
8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 10
(V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Eliza and is the answer not in the manual?
Questions and answers