Install The Software - Canon PIXMA MP990 Series Getting Started Manual

Install the Software

To use the machine by connecting it to a computer,
software including the drivers needs to be copied
(installed) to the computer's hard disk. The
installation process takes about 20 minutes. (The
installation time varies depending on the computer
environment or the number of applications to be
installed.)
The screens below are based on Windows Vista
operating system Ultimate Edition (hereafter
referred to as "Windows Vista") and Mac OS X
v.10.5.x.
• Quit all running applications before installation.
• Log on as the administrator (or a member of the
Administrators group).
• Do not switch users during the installation process.
• Internet connection may be required during the installation.
Connection fees apply.
• It may be necessary to restart your computer during the
installation process. Follow the on-screen instructions and
do not remove the Setup CD-ROM during restarting. The
installation resumes once your computer has restarted.
• If the firewall function of your security software is turned
on, a warning message may appear that Canon software is
attempting to access the network.
If such a warning message appears, set the security
software to always allow access.
• Mac OS 9, Mac OS X Classic environments, or Mac OS X
v.10.3.8 or earlier are not supported.
1
□ For Windows Vista/
XP
If you are using Internet
Explorer 7 or later,
you can use the Web
print software Easy-
WebPrint EX. An internet
connection is required
for installation. (It is also
possible to install this
software later.)
•
1
Turn on the computer, then insert the Setup CD-ROM
into the CD-ROM drive.
Turn on the computer,
then insert the Setup
CD-ROM into the CD-
ROM drive.
The setup program will
start automatically.
If the program does not start automatically, double-click the
CD-ROM icon in Computer or My Computer.
When the CD-ROM contents appear, double-click MSETUP4.
EXE.
Network Connection