Usb Connection; Install The Software - Canon PIXMA MP990 Series Getting Started Manual

USB Connection

Install the Software

To use the machine by connecting it to a computer, software including the drivers
needs to be copied (installed) to the computer's hard disk. The installation
process takes about 20 minutes. (The installation time varies depending on the
computer environment or the number of applications to be installed.)
The screens below are based on Windows Vista operating system Ultimate
Edition (hereafter referred to as "Windows Vista") and Mac OS X v.10.5.x.
For a USB connection, a USB cable is required.
• Quit all running applications before installation.
• Log on as the administrator (or a member of the Administrators group).
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees apply.
• It may be necessary to restart your computer during the installation process. Follow the on-
screen instructions and do not remove the Setup CD-ROM during restarting. The installation
resumes once your computer has restarted.
• Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not
supported.
USB cable
□ If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
If you connect a USB cable to the machine before
installation of the drivers, this screen appears.
1
Remove the USB cable connected to your
computer.
The dialog box may close. In this case, proceed from
2
Click Cancel to quit the dialog box.
3
Proceed from .
.
USB Connection