Hardware Setup
Turn the Power On
1
Plug the power cord into the back
left of the machine, then connect
the other end to the wall outlet.
•
Do NOT connect the USB cable or
Ethernet cable at this stage.
•
Make sure that the Document Cover
(A) is closed.
2
B
A
Open the Operation Unit (B) and
press the ON button (C) to turn on the
machine.
•
The machine may make some operating
noises. This is normal operation.
3
C
D
Use the { or } button (D) on the Operation
Panel to select the language for the LCD (E),
then press the OK button.
•
If an unintended language is displayed on the LCD, press the Back button (F) to return to
the Language selection screen.
4
E
F
When the above
screen is displayed,
press the OK button
and go to the next
step.
Hardware Setup