7
When the access point is ready, press the OK button on
the machine, then press the WPS button on the access
point within 2 minutes.
The Wi-Fi lamp (blue) flashes while searching for an access point.
•
If the timeout error screen appeared repeatedly, or if another error appeared, refer to the printed manual: Network Setup Troubleshooting.
•
For details on WPS, refer to the manual of your access point.
8
C
When the completion screen appears, press the OK
button, then press the HOME button (C).
The standby screen returns.
Wireless Setup Using WPS (Wi-Fi Protected Setup)
Next, read "Confirm
Connection Status" on
page 33!
Network Connection