Align The Print Head - Canon PIXMA MP990 Series Getting Started Manual

Align the Print Head

Align the Print Head for better print results.
This takes about 5 minutes.
Use a sheet of supplied specialty paper (Matte
Photo Paper MP-101) for alignment.
 Hardware Setup
1
A
B
Load a sheet of supplied specialty paper (Matte
Photo Paper MP-101) in the Rear Tray (A) by
referring to steps to in "Loading Paper"
on page 50.
• Be sure to use MP-101 for Automatic Print Head
Alignment.
• MP-101 cannot be fed from the Cassette. Load it in
the Rear Tray.
• MP-101 has front and back sides. Load it so that the
cut corner (B) is at the top right.
2
C
Confirm the message on the LCD and press the OK
button.
Extend the Output Tray Extension (C).
• Print Head Alignment takes about 5 minutes to
complete.
Wait until the pattern is printed, then go to the next
step.
• For details on media sizes and types you can use, refer to
"Loading Paper" in the on-screen manual: Basic Guide.