Reading From And Writing To A Memory Card; Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon PIXMA MP800 User Manual

Chapter 9
Reading from and Writing to a Memory
Card
Setting up the Card Slot as the Memory Card Drive of
the Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
When <Read/write attribute> under <Device settings> is set to <Read/write
Important
mode> using the Operation Panel of the machine, card direct printing cannot be
done. After using the Card Slot as the memory card drive of the computer,
remove the memory card, then be sure to set <Read/write attribute> to <Read-
only mode>.
1
Display the Read/write attribute screen.
(1) Ensure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. See
on page 45.
(2) Press [Menu].
(3) Use [ ] or [
(4) Use [ ] or [
(5) Use [ ] or [ ] to select <Other settings> and then press [OK].
(6) Use [ ] or [ ] to select <Read/write attribute> and then press [OK].
2
Specify the Read/write attribute.
(1) Use [ ] or [ ] to specify <Read/write attribute>.
Read-only mode:
Read/write mode:
(2) Press [OK].
Note
90

Reading from and Writing to a Memory Card

] to select <Maintenance/settings> and then press [OK].
] to select <Device settings> and then press [OK].
The Card Slot is used only for reading. Be sure to select this
mode when printing photos from a memory card.
The Card Slot is used as the memory card drive of the
computer. Photo data can be written into the memory card.
When using the Card Slot as the memory card drive of the computer, the
removal operation from the computer is needed before removing the
memory card from the machine.
Right-click the removable disk icon and click [Eject]. If [Eject] is not
displayed on the screen, ensure that the Access Lamp is not flashing and
remove the memory card.
Be sure to drag the
"Inserting the Memory Card"
icon into the Trash.
Chapter 9