Canon PIXMA MP800 User Manual page 91

3
Select the scan operation.
(1) Press [SCAN].
The scan process selection screen is displayed.
(2) Use [ ] or [ ] to select the scan operation, then press [OK].
Scan standby screen is displayed.
Save to PC:
Save as PDF file:
Attach to E-mail:
Open with application:
Scan film and save:
4
Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
Important
Note
Scanning from an Application Software
You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant application
software and handle the scanned image in the application software. For detailed operations,
refer to the Scan Guide.
Chapter 8
The document is scanned and saved.
The document is scanned and stored as a PDF file.
The document is scanned, and the image is attached to an e-mail
using the e-mail application software.
The document is scanned and displayed on the registered
application software.
The film is scanned and saved.
If with some types of original the position and size of the image is not
scanned in correctly, please refer to "Selecting the Behavior of the
Operation Panel with MP Navigator" in the Scan Guide (On-screen
Manual) and change the MP Navigator [Document Type] and [Document
Size] to match those of the original being scanned.
The operation to be performed after scanning the document depends on
the scan operation setting you have selected in step 3. For details on how
to modify the operation settings, refer to the Scan Guide.
Scanning Images 89