Related Manuals for Directed 403.CHRYSLER6
Summary of Contents for Directed 403.CHRYSLER6
- Page 1 403.CHRYSLER6 v2.14 2014 Dodge/Ram 3500 THCHD3, THCHD3-REV2 Compatible (Sold Separately)
-
Page 2: Table Of Contents
Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness (THCHD3 Rev. 1 to 2) Wiring diagram Locating components in the vehicle Vehicle connections Module programming Key2GO Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list... -
Page 3: Introduction
Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 4: Vehicle Function Compatibilities
Fuel level/EV battery level Door Locks Status Key2GO E-Brake Status Immobilizer Bypass-Data No Key Req'd Ignition Status OEM Remote Start Activation using XL-202 or RF kit RAP Shut Down (Retained ACC Power) 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 5: Pre-Installation And Application Warnings
The Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. The RAP Off connection is ONLY required if NOT supported in data. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 6: Installation
Headlight Switch) under driver side dash) Parking Light (MUX): (+) 12V: Red, pin 3 White/Brown, (-) Driver Door Trigger: pin 1 Do not connect Violet, pin 9 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 7: Wiring Diagram
BCM - plug F (black connector at (white connector under driver dash, Headlight Switch) above kick panel) Parking Light (MUX): White/Brown, pin 1 (-) Driver Door Trigger: Violet, pin 9 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 8: Locating Components In The Vehicle
Locating components in the vehicle 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 9: Vehicle Connections
BCM under driver dash, white 48 pin plug (F), pin 9 Violet H2/12 Blue/Red (-) W2W Only - Hood Switch Input Remote Starter Input 10-pin black connector (H3) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. - Page 10 BCM under driver dash, black 4 pin plug (B), pin 3 Red (40A) Ground (chassis ground) Ignition Ignition Node (ignition switch), black 6 pin plug, pin 4 Violet/Brown Tachometer any fuel injector brown/stripe (gasoline) 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved.
-
Page 11: Module Programming
Click on Submit Key2GO Request. Once the configuration is completed, reconnect the module. The LED turns ON solid green for 3 seconds, then turns OFF. You have successfully completed the module programming sequence. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 12: Key2Go
Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application. -
Page 13: Led Diagnostics And Troubleshooting
External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. - Page 14 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved.
-
Page 15: Soft Reset
Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 16: Feature Programming
To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 17: Feature And Option List
3. Enabled* status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 18: Limited One Year Consumer Warranty
This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. -
Page 19: Quick Reference Guide (Customer Copy)
Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved. - Page 20 Notes 403.CHRYSLER6 2.14 2014 Dodge/Ram 3500 ©2022 VOXX•DEI LLC. All rights reserved.
Need help?
Do you have a question about the 403.CHRYSLER6 and is the answer not in the manual?
Questions and answers