Directed 403.TL10 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 403.TL10
  6. Installation manual

Directed 403.TL10 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
403.TL10
DB3
v2.29
2017 Toyota Camry (H Key)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 403.TL10 and is the answer not in the manual?

Questions and answers

Related Manuals for Directed 403.TL10

Summary of Contents for Directed 403.TL10

  • Page 1 403.TL10 v2.29 2017 Toyota Camry (H Key)

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Key type Wiring diagram Locating components in the vehicle Vehicle connections Module programming Note: The master key is REQUIRED to complete the module programming successfully. Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming...

  • Page 3: Introduction

    This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Brake Status (foot brake) Trunk / Hatch Release Door Locks Status Control of aftermarket alarm with OEM remote E-Brake Status Immobilizer Bypass-Data No Key Req'd Ignition Status Remote Start Takeover 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    For vehicles with dot-stamped keys, the TL10 firmware. the TL5 & TL7 firmware. see the TL11 firmware. Note: Some replacement keys may not have any markings on the key. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    (middle conn. left side of steering column) Ignition Connector (+) 12V: Green, pin 5 (+) Starter: Blue, pin 7 (+) Ignition 1: Black, pin 6 RDA: Blue, pin 16 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Vehicle Connections

    Blue H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter Input 10-pin black connector (H3) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 Ignition Switch, white 8 pin plug, pin 1 Pink Second Starter Ignition Switch, white 8 pin plug, pin 3 Lt. Green Starter Ignition Switch, white 8 pin plug, pin 7 Blue 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 10: Module Programming

    OFF when programming is done. Turn the key to the OFF position, and remove it from the ignition barrel. You have successfully completed the module programming sequence. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 11: Connecting The Module

    (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 12: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 13 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 14: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 15: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 16: Feature And Option List

    If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 17: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 18: Quick Reference Guide

    Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 19 Notes 403.TL10 2.29 2017 Toyota Camry (H Key) ©2022 VOXX•DEI LLC. All rights reserved.

Table of Contents