Directed 403.SUBARU2 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 403.SUBARU2
  6. Installation manual

Directed 403.SUBARU2 Installation Manual

2010 subaru outback
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
403.SUBARU2
DB3
v1.38
2010 Subaru Outback

Advertisement

Table of Contents
loading

Related Manuals for Directed 403.SUBARU2

Summary of Contents for Directed 403.SUBARU2

  • Page 1 403.SUBARU2 v1.38 2010 Subaru Outback...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Convenience-Only programming, see next section. Module programming for convenience only (skip transponder) Key2GO Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming...

  • Page 3: Introduction

    Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Entry Monitoring ALL Door Pins Door Unlock Entry Monitoring Trunk/Hatch Pin Driver Priority Unlock Brake Status (foot brake) Trunk / Hatch Release E-Brake Status Control of aftermarket alarm with OEM remote Key2GO 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [3] Keysense connection: Only needed if keysense is not recognized through data at the time of programming. Refer to the "LED diagnostics & Troubleshooting" section for more details. [4] Key Release Output: Only required for Pit Stop mode or manual transmission vehicles. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    (white conn. Reference Chart 17 16 Fuse 20A section. right of steering column) 27 26 34 33 Immo. Data: (+) Starter 2: White/Blue, White/Orange or pin 31 White/Green, pin 6 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Orange, pin 3 (-) Key Release Output: Blue/Red: 12 7 6 5 19 18 (-) Ground 27 26 35 34 (-) Key Release 1: Brown/Red or (+) 12V Black/Red, pin 4 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Vehicle Connections

    Blue/Red Must use a relay. black/red (1); orange (2) (-) W2W Only - Key Release Output BIU right of steering column, white 35 pin plug (B), pins 4, 3 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 (Data) TX H4/2 Black (-) Ground H4/3 Green (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 No Connection H5/2 No Connection 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 10 6 pin plug, pin 2 white/blue Tachometer instrument cluster, white 40 pin plug, pin 30 or ECM behind glove red/white to white/green box, white 35 pin plug (B), pin 15 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 11: Module Programming

    When the configuration is completed, reconnect the module. The LED will turn ON solid green for 3 seconds and then turn OFF. You have successfully completed the module programming sequence. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 12: Module Programming For Convenience Only (Skip Transponder)

    Turn the ignition ON and wait until the LED turns OFF. START Key OUT Turn ignition OFF and remove the key from the ignition barrel. START You have successfully completed the module programming sequence. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 13: Key2Go

    Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.

  • Page 14: Led Diagnostics And Troubleshooting

    External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 18: Feature And Option List

    Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the 2. Safelock beginning of the sequence, and relock after start and shutdown. 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 19: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 20: Quick Reference Guide (Customer Copy)

    3 possible ways you can send commands to your vehicle, using the: in Park (P). • Factory remote. • Aftermarket remote. Press the Remote Start button on the transmitter.* • Directed SmartStart application via your smartphone. & Parking lights The parking lights will flash once to indicate the vehicle is Press...
  • Page 21 Notes 403.SUBARU2 1.38 2010 Subaru Outback ©2022 VOXX•DEI LLC. All rights reserved.

Table of Contents