Table of Contents
Advertisement
Event
The wheelchair switches itself off after a
certain period of inactivity (20–30
minutes).
The wheelchair stops while being driven.
The wheelchair can only be driven at
reduced speed.
70 - Troubleshooting
Possible cause
The energy saving mode has been
activated.
The main circuit breaker has tripped.
A seat function has triggered the
automatic speed restriction.
Remedy
Press the start button on the control panel
to turn on the wheelchair again.
Reset the main circuit breaker once. See
page 36.
Make sure that the backrest and the leg
rest are not tilted and that the seat is not
tilted or lifted.
Advertisement
Table of Contents
