Armrest - Permobil K300 PS Junior User Manual

4.10.2.2 Backrest tilt
This is how you tilt the backrest.
Allen key 4 mm
Wrench 10 mm
1. Hold the backrest so that it does not fall forward.
2. Remove the two screws, the two washers, and the two nuts. There is one
screw, one washer, and one nut on each side of the backrest.
3. Adjust the angle of the backrest to the preferred position and put the
screws in the nearest fixed position.
4. Install the washers and the nuts.

4.10.3 Armrest

This chapter shows you how to adjust the height, angle, and position of the
armrest and the armrest pad.
42 - Wheelchair usage