Permobil K300 PS Junior User Manual page 52

4.10.8.3 Vertical angle
This is how you adjust the vertical angle of the footplate.
Allen key 4 mm
Wrench 10 mm
1. Loosen the two screws
2. Adjust the vertical angle of the footplate to the preferred position.
3. Tighten the two screws
4.10.8.4 Position
This is how you adjust the position of the footplate.
Allen key 4 mm
Wrench 10 mm
1. Remove the two screws
2. Put the footplate in the required position and put the two screws
the nearest fixed hole configuration. There are five fixed hole
configurations.
3. Install the two nuts .
52 - Wheelchair usage
. Use a wrench to hold the nuts
. Use a wrench to hold the nuts
and the two nuts .
.
.
in