Table of Contents
Advertisement
Model All Model
Group Body Electrical System(92)
Number KT2008112501
Date Tuesday, November 25, 2008
Area N.America
Subject Adjusting Electrical Therminal Pin Tension
- Description
Adjusting Electrical Terminal Pin Tension
This artical provides clarification on proper procedure for adjusting electrical terminal pin tension.
Under no circumstances should the male terminal be twisted, these terminals must remain as
designed, the only pin tension that is being recommended is for the female terminals is where we
want to tighten the pin fit and have the proper alide resistance when completed.
All electrical terminals are in alignment and should never be twisted or angled in an attempt to
repair a connection concern.
This is an improper repair attempt and will be subject to warranty charge-back. Terminals are
twisted.
Depress the plastic locking tab and gently remove the terminal to be adjusted. When removed
adjust the metallic contact tang until proper slide ersistence
Advertisement
Table of Contents
