Table of Contents
Advertisement
8. Enter the appropriate password from the table below, and then click OK.
9. Upgrade will begin and the progress of the upgrade will appear on the bar graph.
Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for10
seconds, place it back in the ON position and then click OK to continue according to Information
displayed on the screen.
10. Click OK on the final screen, which indicates upgrade is complete.
11. Check if any incidental Diagnostic Trouble Codes (DTC) have been created by the upgrade,
and clear the DTC (s) present.
AFFECTED PRODUCTION RANGE
WARRANTY CLAIM INFORMATION
Advertisement
Table of Contents
