Table of Contents
Advertisement
Rolling Compensation - The rolling compensation procedure is critical to ensuring an accurate
alignment. When performing the rolling compensation, be sure to do the following:
1. Set tire pressure to factory specification.
2. Ensure the lift is level so vehicle's suspension and steering are in a neutral position.
3. Set the target levels before rolling compensation. After completing the compensation, do not
re-level the targets.
4. Roll the vehicle by turning the left rear tire. This will not disturb the vehicle's suspension and
steering systems. Do not roll the vehicle by pushing or
pulling on body parts, bumpers, etc.
5. Ensure the pins are in the slip plates, and the Turnplate Bridge is flush with the rolling surface to
minimize the vehicle's suspension movement.
Advertisement
Table of Contents
