Table of Contents
Advertisement
Slip Plates - The slip plates of a Hunter alignment rack are designed to move smoothly and freely
to provide accurate measurements. Before pulling a vehicle onto the rack, check that they move
freely and do not bind. Periodically clean the area underneath the slip plates by blowing
compressed air through to remove any debris. If this does not free a binding plate, contact your
local Hunter representative for cleaning and lubrication recommendations.
StraightTrak LFM feature (Road Force Balance) - StraightTrak (Road Force Balance) is an optional
feature for Hunter's GSP9700 wheel balancer. This feature measures lateral force of a tire due to
ply steer, conicity, and other issues which may contribute to vehicle drift or pull. This can be a
useful tool for vehicles with multiple conditions.
Use StraightTrak (Road Force Balance) to arrange the 4 wheel/tire assemblies of a vehicle in a
configuration which will result in the lowest drifting or pulling force by doing the following:
1. Remove all wheel/tire assemblies from the vehicle.
2. Balance the front left assembly on the Hunter GSP97OO with StraightTrak feature. An icon
located in the lower right corner will show whether or
not StraightTrak is enabled.
Advertisement
Table of Contents
