Table of Contents
Advertisement
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Transmission and Drivetrain > Automatic Transmission/Transaxle > Fluid - A/T > Component
Information > Technical Service Bulletins > A/T - 6-Speed Automatic Transaxle Fluid Level Check > Page 1796
Fluid - A/T: Technical Service Bulletins A/T - Proper Checking of A/T Fluid Level
Model All Model
Group Automatic Transmission(52)
Number KT2009043001
Date Thursday, April 30, 2009
Area N.America
Subject Proper Checking of the Automatic Transmission Fluid Level
- Description
Proper Checking of the Automatic Transmission Fluid Level
The automatic transmission level should be checked regularly. Keep the vehicle on level ground
with the parking brake.
Check fluid as follows:
1. Make sure the transmission fluid temperature is between 158-176°F, use scan tool/GDS to verify
temperature if needed. Checking the fluid level before it has reached operating temperature will
result in false readings. Warm-up time can vary depending on ambient temperature - see sample
graph below.
2. Place the selector lever in P (Park) or N (Neutral) and engine is at idle speed.
3. Confirm the fluid level is in the "HOT" range on the dipstick. If the fluid level is lower, add the
specified fluid as required.
> Normal warm-up time can vary depending on the ambient temperature
> Graph shown is for vehicle in 95°F ambient temperature idling in Park for 30 minutes and finally
reaching the proper temperature to check the fluid level, driving the vehicle for 10-15 minutes will
decrease time to proper temperature
Advertisement
Table of Contents
