Run Calibration - Samsung WW1 B Series Manual

STEP 6 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap and hold
turn on the washing machine.
NOTE
• Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum.
• If the display does not respond to control inputs. Remove the sticker.
• Make sure the laundry is fully inserted in the drum and not caught in the door.

Run Calibration

• Initial setup includes the calibration process which comes after the language selection. You must proceed
calibration before using the washing machine.
• Empty the drum, and then tap
• When calibration is complete, power turns off and then turns on automatically.
• If you want to proceed calibration again, tap and hold
Auto dispenser
Auto softener
compartment
NOTE
• The "Close dispenser" message appears if the detergent drawer is not completely closed. Close the detergent
drawer before you start the washing machine.
• If message "Refill Auto detergent dispenser", "Refill Auto softener dispenser", or "Refill Auto detergent and
softener dispensers" appears on the display, refill the corresponding compartment. After adding detergent or
softener, the refill alert will dismiss once the washer completes a cycle.
• Detergent/softener is not automatically dispensed in the Wool cycle. To dispense detergent/softener in the Wool
cycle, you must manually set the input level of detergent/softener.
• It may be hard to open the detergent drawer with just your fingertips. Grab the detergent drawer handle firmly
with your hand and pull to open it.
• Push the detergent drawer all the way to the end to close it. You will hear a click sound when the drawer is
properly closed.
• Keep the door open so that inside the drum and detergent drawer can be well ventilated.
• Always keep the detergent drawer and the auto detergent/softener compartment covers closed except when
adding detergent and/or softener. Air can enter all the way inside and can dry out the detergent and/or softener.
• Some detergent may leak from the detergent drawer while removing the drawer from the washing machine.
This is normal.
B-PJT_WASHER-AD_SimpleUX_SG_DC68-04409S-00_EN.indd 15
to start calibration.
to enter the system function and select Calibration.
CAUTION
Manual detergent
compartment
• Make sure to empty the detergent drawer before
moving the washing machine.
• Do not add detergent to the drawer without the
Auto liquid
detergent
detergent and softener compartment.
compartment
• The washing machine stops operating if you open
the detergent drawer while water is being supplied.
for 3 seconds to
English 15
2022-06-15 11:17:46