•
Verify the detergent and softener compartment openings, turn the caps to open, and then fill with detergent and
softener up to the MAX line.
•
Do not use a mixture of a detergent and a softener.
•
Always keep the detergent container with the cap closed.
Setting the amount of detergent/softener input
Follow these instructions to increase or decrease the amount of detergent/softener dispensed automatically.
1.
Tap .
2.
Turn the Navigation dial to select Dose Per Wash or Dose Per Rinse.
•
Dose Per Wash: You can select the amount of detergent to input.
•
Dose Per Rinse: You can select the amount of softener to input.
3.
Tap O to change the setting.
•
Default setting is Med., and you can select from Med., High, Off, or Low.
Setting the water hardness/softener concentration level
1.
Tap and hold
for 3 seconds.
2.
Turn the Navigation dial to select Water hardness or Softener.
3.
Tap O to change the setting.
•
The default setting for Water hardness is Med. Changing the setting adjusts the amount of detergent dose.
Water hardness setting
Amount of detergent dose
•
The default setting for Softener is 1x. Changing the setting adjusts the amount of softener dose.
Softener setting
Amount of softener dose
16
English
B-PJT_WASHER-AD_SimpleUX_SG_DC68-04409S-00_EN.indd 16
Soft
Decreased
1x
Normal
Dose per Wash
Eco 40-60
For optimal performance
'OK' to set auto dispense
Water Hardness
Eco 40-60
For optimal performance
OK' to set the hardness level
Med.
Normal
2x
Decreased
Med.
Med.
Hard
Increased
3x
Even more decreased
2022-06-15
11:17:46