Table of Contents
Advertisement
STEP 6 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap and hold
turn on the washing machine.
NOTE
•
Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum.
•
If the display does not respond to control inputs. Remove the sticker.
•
Make sure the laundry is fully inserted in the drum and not caught in the door.
Run Calibration
•
Initial setup includes the calibration process which comes after the language selection. You must proceed
calibration before using the washing machine.
•
Empty the drum, and then tap
•
When calibration is complete, power turns off and then turns on automatically.
•
If you want to proceed calibration again, tap and hold
Auto dispenser (WW**D***9***, WW**D***8***, WW**D***7***,
WW**D***6***, WW**D***5***, WW**D***4*** models only)
Dispenser can be set to dispense liquid softener or liquid detergent. For detailed instructions, see see the user
manual registered in the Samsung website or the separately provided instruction guide.
Dispenser
NOTE
•
The "Close dispenser" message appears if the detergent drawer is not completely closed. Close the detergent
drawer before you start the washing machine.
•
If message "Refill Auto dispenser with detergent", "Refill Auto dispenser with softener", or "Refill Auto dispenser
with detergent and softener" appears on the display, refill the corresponding dispenser. After adding detergent
or softener, the refill alert will dismiss once the washer completes a cycle.
•
Detergent/softener is not automatically dispensed in the Wool cycle. To dispense detergent/softener in the Wool
cycle, you must manually set the input level of detergent/softener.
•
It may be hard to open the detergent drawer with just your fingertips. Grab the detergent drawer handle firmly
with your hand and pull to open it.
•
Push the detergent drawer all the way to the end to close it. You will hear a click sound when the drawer is
properly closed.
DC68-04508B-02_IB_B-PJT-B11_WASHER_SimpleUX_EN.indd 15
to start calibration.
to enter the system function and select Calibration.
CAUTION
•
Make sure to empty the detergent drawer before
moving the washing machine.
•
Do not add detergent to the drawer without the
Dispenser
dispensers.
•
The washing machine stops operating if you open
the detergent drawer while water is being supplied.
for 3 seconds to
English 15
2024-03-15
5:42:36
Advertisement
Table of Contents
