Canon imageFORMULA DR-X10C User Manual page 118

■ Mode-Dependent Function Limitations
The following tab sheet functions are partially disabled
according to the selected mode. For details on the
[Brightness] tab sheet settings,
Sheet" on p. 8-12.
Basic
Black and White ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
Error Diffusion
Advanced Text
✔ ✔ ✔ ✔ ✔
Enhancement
Advanced Text
✔ ✔
–
Enhancement II
✔ ✔ ✔
256-level Gray
✔ ✔ ✔
24-bit Color
Auto Color
✔ ✔ ✔ ✔ ✔
Detection
✔ : available for setting, – : not available for setting, or auto
■ [Auto Image Type Detection Settings] Dialog
Box
This dialog box appears when you select [Auto Color
Detection], and enables you to make settings for detecting
whether scanned images are in color or black-and-white,
and select the mode to use when an image is detected as
black-and-white.
see "[Brightness] Tab
Settings Tab Sheet
Image processing Others
✔ ✔ ✔ ✔
–
✔ ✔ ✔ ✔ ✔
– –
✔ ✔ ✔
– –
✔ ✔ ✔ ✔ ✔
– –
✔ ✔ ✔ ✔ ✔ ✔
–
✔ ✔ ✔ ✔ ✔
– –
✔ ✔
– – –
8-10
Chapter 8 ISIS/TWAIN Driver Settings
Color Saturation/Proportion of Color
These settings are for judging whether a document is in
color.
Depth of color in documents is detected by [Color
Saturation], and [Proportion of Color] is used to judge a
color document.
IMPORTANT
• Changing these settings is not normally necessary. Change
them only if you want a document of light colors to be judged
to be a black-and-white document.
• Select [24-bit Color] if color documents are judged to be black-
and-white documents with the default settings.
[Mode in case of binary]
Select the scanning mode when a page is judged to be
black-and-white.
Brightness and Contrast
Adjust the brightness and contrast when [Advanced Text
Enhancement] or [Advanced Text Enhancement II] is
selected for [Mode in case of binary]. For other modes, the
brightness and contrast are set on the [Brightness] tab
sheet.