Canon imageFORMULA DR-X10C User Manual page 91

■ Skew Detected
Error Code: J018
Problem: A skewed document page contacted the wall of
the transport path.
Solution: Remove and reposition the document page.
■ Double Feed
Error Code: D002
Problem: A double feed was detected by the document
length.
Solution: Remove the double fed document page(s) from
the eject outlet, return them to the Document Feed Tray,
and scan again. (See p. 3-22.)
Error Code: D004
Problem: A double feed was detected ultrasonically.
Solution: Remove the double fed document page(s) from
the eject outlet, return them to the Document Feed Tray,
and scan again. (See p. 3-22.)
■ Double Feed (Rapid Recovery System)
Problem: Double feeding of document pages has been
detected while scanning with the Rapid Recovery System
enabled.
Solution: Remove the double fed document page(s) from
the eject outlet, return them to the Document Feed Tray,
and scan again. (See p. 3-22.)
■ Staple Detected
Error Code: J001
Problem: A stapled document has been detected.
Solution: Remove the staple(s), and rescan the document.
■ Tray Error
Error Code: E021
Problem: An error has occurred with the Document Feed
Tray.
Solution: Turn the power OFF, and restart the scanner.
■ Count Mismatch
Error Code: U001
Problem: The specified count has not yet been reached.
Solution: Check the document count, and scan again.
Error Code: U002
Problem: Scanning finished without reaching the
specified count.
Solution: Check the document count, and scan again.
6-4
Chapter 6 Practical Examples