Canon imageFORMULA DR-X10C User Manual page 35

Torn documents
Documents with
paper clips or staples
• To scan bound multi-page documents such as invoice
booklets, place the bound edge against the feeder inlet and
scan by manual feeding.
• To use the Long Document Mode, feed document pages
manually, one after another.
■ Long Document Mode Setting
Using the Long Document mode, pages up to 118.1" (3 m)
long can be scanned with automatic paper size detection.
You can set the Long Document Mode setting from the
User Mode.
1.
Press the Menu key on the control panel.
Menu Key
The User Mode is activated.
2.
Press the [ ] key five times to display Long
Document Mode. (See p. 4-9.)
3.
Extremely thin,
translucent paper
4.
5.
6.
3-5
Confirm your settings.
[ON2]: When the [Auto Detection] or [Scanner's
Maximum] page size setting is selected, document page
lengths up to 118.11" (3 m) can be detected.
[ON1]: When the [Auto Detection] or [Scanner's
Maximum] page size setting is selected, document page
lengths up to 39.37" (1 m) can be detected.
[OFF]: When the [Auto Detection] page size setting is
selected, document page lengths up to 17.01" (432 mm)
can be detected.
Press [Enter].
Enter Key
The current setting is indicated by blinking square brackets
([ ]).
Press the [ ] or [ ] key to select [ON] or [OFF], and
press [Enter] to accept the selection.
Press the Stop key to exit the User Mode.
IMPORTANT
• Processing may be slowed when scanning in the Long
Document Mode.
• When scanning with the Long Document Mode set to [ON1], if
the scan is performed with the scanning mode set to color and
the image quality set to [Image quality priority], the image may
be lost. If this occurs, scan by using black and white or
reducing the image quality.
• When scanning with the Long Document Mode set to [ON2], if
the scan is performed at 400/600 dpi or the scan is performed
with the scanning mode set to color and the scanning side set
to [Duplex], the image may be lost. If this occurs, scan by
reducing the resolution, using black and white, or setting the
scanning side to [Simplex].
Chapter 3 Basic Operation