Installation Requirements - Canon DR-2080C Startup Startup Manual

Installation Requirements

In order to use the DR-2080C, your computer must satisfy the following
system requirements:
IBM PC/AT-compatible that satisfies the following specifications:
• Intel Celeron 733MHz or faster
• Main memory: 256 MB or more (recommended)
• Hard disc space: 400 MB or more
SCSI board or USB 2.0 interface board that supports the scanner (→ page
23 "Interface Board")
Display that is capable of resolution of 1024 x 768 (XGA) or better
(recommended)
One of the following operating systems, running normally:
Connecting via SCSI
• Microsoft Windows 95
• Microsoft Windows 98/98SE
• Microsoft Windows Me
• Microsoft Windows NT 4.0 Workstation
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP
Connecting via USB2.0
• Microsoft Windows 98SE
• Microsoft Windows Me
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP
ISIS-compatible or TWAIN-compatible application software that runs
normally under your operating system
Notice
If you are connecting the scanner via USB 2.0 interface, be sure to use an
updated version of the USB 2.0 driver. For details on the updated driver,
contact your dealer.
If your CPU, memory or SCSI board does not meet the recommended
specifications, you may experience problems such as slow scanning speed.
Note
Be sure to allocate sufficient virtual memory.
Use the SCSI board provided a SCSI board recommended for use with the
unit.
After checking the shape of the connectors on the computer connected to
the unit and SCSI device, use the SCSI cable provided purchase a SCSI
cable with the right combination of connectors. (→ page 23)
20
Installing the Scanner