Installation Requirements - Canon imageFORMULA DR-6010C Reference Manual

1-4 Installation Requirements

To use the DR-6010C scanner, your computer must satisfy the following
system requirements.
• One of the following operating systems:
- Microsoft Windows 2000 Professional SP4 or later
- Microsoft Windows XP Professional SP3 or later
- Microsoft Windows XP Home Edition SP3 or later
- Microsoft Windows XP Professional x64 Edition SP2 or later
- Microsoft Windows Vista Home basic, Home Premium, Business,
Ultimate or Enterprise SP1 or later
Note
Microsoft Windows Vista has 32- and 64-bit versions.
• A computer that meets the following specifications:
- CPU: Celeron M (1.4 GHz or faster)
- Memory: 512 MB or more
- Hard disk: 1 GB or more available space
- Interface: USB port present as standard equipment on the
computer (Hi-Speed USB 2.0) or SCSI expansion card
- Monitor: Resolution of 1024 × 768 (XGA) or better
recommended.
• When using a SCSI expansion card, select one of the following
recommended models.
- AVA-2915LP (Adaptec)
- AVA-2930LP (Adaptec)
- REX-CB31 (Ratoc Systems)
• An ISIS-compatible application or a TWAIN-compatible application
that is compatible with the above operating systems.
IMPORTANT
• If you do not know the requirements for your computer system,
contact the store where you purchased the computer or the
manufacturer of the computer for more information.
• Do not connect both a USB interface and a SCSI card at the same
time.
• Be aware of the following information when using the USB
interface that was provided as standard with your computer.
- The USB interface should be a Hi-Speed USB 2.0 interface.
- Scanning speeds are lower if your computer's standard USB
interface is USB Full-Speed (equal to USB 1.1.) In this case,
using a SCSI expansion card is recommended.
14 Before Using the Scanner