Installing The Scanner; Installation Requirements - Canon imageFORMULA CR-25 Startup Startup Manual

Installing the Scanner

Installation Requirements

To use the CR-25/55, your computer must satisfy the following system
requirements:
• One of the following operating systems:
• Microsoft Windows 2000 Professional SP3 or later
• Microsoft Windows XP Professional SP1 or later
• Microsoft Windows XP Home Edition SP1 or later
• A computer that meets the following specifications:
• CPU: Pentium 4 (1.5 GHz or higher)
• Memory: 256 MB or more
• Hard disk: 400 MB or more available space
• CD-ROM drive
• Hi-Speed USB 2.0/USB Full-Speed (equal to USB 1.1)
• Extension slot: PCI or CardBus (for interface cards)
• Monitor: Resolution of 1024 x 768 (XGA) or better recommended
IMPORTANT
• If you do not know the requirements for your computer system, contact
the store where you purchased the computer or the manufacturer of the
computer for more information.
• Use the most recent version of the USB 2.0 driver provided by Microsoft.
Contact your local authorized Canon dealer or service representative for
more detailed information.
• Not all USB interfaces provided as standard with personal computers are
guaranteed. Contact your local authorized Canon dealer for more detailed
information.
• Scanning speeds are lower if your computer's standard USB interface is
USB Full-Speed (equal to USB 1.1).
• Use the USB cable provided with the scanner, or a Hi-Speed USB 2.0
compatible cable.
• If the CPU, memory, interface card, and other specifications do not satisfy the
installation requirements, the scanning speed may be greatly reduced and
transmission may take a long time.
• Even if the computer satisfies the recommended specifications, the
scanning speed may vary, depending on the scan settings.
Installing the Scanner
15