Feed Rollers Replacements - Canon DR-2080C Startup Startup Manual

CAUTION
The front unit and scanner itself contain a metal roller. Be sure
to wipe both clean. However, do not spray water or cleaning
solution directly onto the rollers. Doing so could damage the
scanner's light source or precision optical components. Also
note that because the power is on during this operation, there
is a risk of electrical shock if the scanner or your hands are
wet.
Because the power is on when cleaning the metal roller,
exercise extreme caution.

Feed Rollers Replacements

Feed rollers (Retard Roller and Feed Roller) are consumables. If the total scan
exceeds 30,000 sheets, a message for roller replacement appears when you
restart the PC. In this case, replace the feed rollers (Retard Roller and Feed
Roller) and reset the counter in the following procedure.
Notice
Windows 95/NT do not support a function to display a message for roller
replacement. To confirm the total scan, check "Total Scan Count" in the
"Version Information" dialog box of the ISIS/TWAIN driver and replace
the Retard Roller and Feed Roller if the count shows around 30,000 scans.
For details on the roller replacement kit (Retard Roller and Feed Roller),
contact your dealer.
Regular Maintenance
61