Placing Documents - Canon imageFORMULA CR-25 Startup Startup Manual

• Your unit has been carefully adjusted to meet most conditions. However,
the below adjustment may be needed depending on your environment
(humidity, temperature, etc.) and the documents you are scanning (checks,
etc.). Perform the adjustment only if necessary.
• Scanning the following types of documents may cause a paper jam or
malfunction. To scan these types of documents, make a photocopy of the
document and then scan the photocopy.
Wrinkled or
creased
documents
Curled
documents
Torn
documents

Placing Documents

This section describes how to place a document for scanning.
1
Pull out the document feed tray.
Note
• When scanning multiple documents, sort them into batches of uniform
paper quality and thickness and load each batch separately. Note that
loading mixed batches may cause paper jams.
• Load a maximum of 50 sheets or a document stack no higher than 0.2"
(5 mm) at a time.
• When scanning relatively thick (0.005" to 0.008" {0.15 mm to 0.2 mm})
documents, the feeding process may cause the document to curl and
cause paper jams at the document feed opening. For such documents,
load no more than 10 sheets at one time.
Documents
with paper
clips or
staples
Carbon
paper
Coated
paper
Using the Scanner
Extremely
thin,
translucent
paper
Documents
with raggedly
torn
perforations
37