Astra-7 ver.RF
Wireless Optic-Electronic
PIR Motion Detector
User Guide
Manufacturer:
TEKO-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
+7(843) 528-03-69
support@teko.biz www.teko.biz www.teko.biz/en
Made in Russia
Ver. 7-rkv1_2_instr
1 FUNCTION
The detector is intended for detection of an
intrusion into a secure space of an enclosed
area,
forming
an
alarm
transmitting alarm signal to the Security Hub
via radio.
The
detector
provides
measurement
transmission via radio:
a) the residual capacity of the battery in Mode
2 (see below) when the capacity value is 30,
20 and 10%.
b) ambient temperature
The transmission interval is 12 s (with Rtst plug
jumpered) or 60 s (with Rtst plug opened).
2 DETECTION ZONE
3 SPECIFICATION
Range of detectable
moving speed, m/s
...................... from 0.3 to 3.0
Wireless coverage range
(line-of-sight), m ...........................................300
Operating frequency range, MHz .................433
Power supply voltage, V .............. from 2.8 to 3.6
Overall dimensions, mm .........................108×31
Operation conditions
Temperature range, °С............ from - 20 to + 50
Relative air humidity, % ........... up to 98 at + 25 °С
notification
and
4 DELIVERY SET
and
Detector delivery set includes: dowel – 2 pcs.,
screw – 2 pcs., jumper – 3 pcs., battery (3.6 V,
Lithium, size AA) - 1 pcs.
5 MODES OF OPERATION
Mode 2* (registration with
Security Hub)
Mode 1
Radio supervi-
sion time**
Lit.1 (433,42 MHz)
with Security Hub)
Lit.3 (434,42 MHz)
High detectability
Normal detectability
* Factory setting.
** For Mode 2 only
Setting operation mode of the detecto ,as
well as LED indication of notifications are
Without moisture condensation
Plug
Jumper
Rmod
less than
10 min.
Rtst
more than
10 min
(registration
Lit
PIR