The Control Panel - Canon imageCLASS MF7280 Operation Manual

The Control Panel

The control panel consists of a touch panel display, for setting the various functions, and physical keys such as the
Start key, Stop key, and the Control Panel Power Switch. The following is an explanation of the keys used in this
manual. For more information, see Chapter 1, "Before You Start Using This Machine," in the Reference Guide.
Reset Key
Press to restore the standard settings of the machine.
Touch Panel Display
The settings screen for each function is shown on this
display.
To Confirm or Edit the Job Status
Press [System Monitor] to
display the screen on the
left, enabling you to confirm
the job status, and cancel
print jobs. You can also see
the machine status, such
as the amount of remaining
paper.
System Monitor Screen
5
COPY SEND
Additional Functions key
Press to specify additional functions.
For more information about additional
functions, see p.27.
To Switch Functions
COPY key
COPY
Press to use the Copy function.
SEND key
SEND
Press to use the Send function.
ON/OFF
ABC DEF
Serial No.
1 2 3
Reset
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
Additional
0
Functions
Stop
Log In/Out Clear
Start
Display
Contrast
Processing/
Error Power
Data
Numeric Keys
Press to enter numeric values.
Log In/Out Key
Press after entering your ID and
password when Department ID
Management is set.
Display Contrast Dial
Use to adjust the brightness of the touch panel
display.
The Control Panel
Send Basic Features screen
Control Panel Power Switch
Press to turn the control panel ON or OFF.
Serial No. Key
Press to display the serial No. on the touch panel
display.
Stop Key
Press to stop a job in progress (scanning only), such
as a scan job, copy job, or fax job.
Start Key
Press to start an operation.
Clear Key
Press to clear entered values.
6