Canon imageCLASS MF7280 Operation Manual page 17

Additional Functions
2 Timer Settings
Enables you to make various timer related settings for the machine, such as the time it takes for the machine to
enter into the Sleep mode.
Date & Time Settings
Enables you to set current date and time. The date and time set here is used as the time
setting when required for any of the device functions.
Auto Sleep Time
Enables you to set the machine to automatically switch the control panel power switch OFF
when it has been idle for a certain period of time after the last print job or a key operation is
performed.
Auto Clear Time
Enables you to set the machine to automatically return to the Basic Features screen of the
selected function when it has been idle for a certain period of time after the last print job or a
key operation is performed.
(1/1)
3 Adjustment/Cleaning
Enables you to make fine adjustments to the zoom, adjust the contrast, or perform cleaning for the machine.
Transfer Roller Cleaning
Enables you to clean the transcription roller in the main unit when the backside of paper is
smudged with printing.
Fixing Unit Cleaning
Enables you to clean the fuser roller in the main unit when black streaks appear with printing
or you replace the toner cartridges.
Feeder Cleaning
Enables you to clean the rollers of the feeder by repeatedly feeding blank sheets of paper
through it.
(1/3)
Special Mode M
Enables you to improve the print quality or irregular print density.
Special Mode N
Enables you to prevent paper curling or jamming.
Special Mode O
Enables you to prevent paper jams with two-sided printing.
Special Mode P
Enables you to use more efficiently lightweight paper for printing.
(2/3)
31
Reference Guide Chapter 3
Reference Guide Chapter 3, 6
Bond Special Fixing Mode
Enables you to specify to perform special fixing for bond paper.
Special Mode S
Enables you to choose whether to set a high priority on avoiding offset or on speed.
Auto Adjustment for Dirty Feeder
When this function is set to 'On', dust, dirt or foreign objects in the feeder will not be printed.
(3/3)
4 Report Settings
Press to set the print conditions for printing a TX Report and Activity Report, or you can print the contents of the
Address Book or Additional Functions.
Settings
Enables you to set the print conditions for printing a TX Report and Activity Report.
TX Report
Enables you to check whether faxes were sent correctly to the intended destination. A TX
Report can automatically be printed after the documents are sent. You can also set the
machine to print a TX Report only when a transmission error occurs.
Activity Report
Enables you to show the results of sent and received documents. You can set for the
Activity Report to be printed at a specified time or be automatically printed when the
number of sent and received documents reaches 40. You can also print the send and
receive logs separately.
RX Report
Enables you to check whether the documents were sent correctly from the sender's
machine and were received successfully by this machine. A RX Report can be printed
automatically after documents are received. You can also set the machine to print a RX
Report only when a reception error occurs.
Print List
Enables you to print an Address Book List or a User's Data List (contents of the
settings specified from the Additional Functions screen).
Additional Functions
Facsimile Guide Chapter 7
Sending Guide Chapter 10
32