Cleaning The Door Seal; Cleaning The Ventilation Gaps; After Cleaning - Miele KFN 7734 D Operating Instructions Manual

Cleaning and care

Cleaning the door seal


Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oil or
grease, it can become porous.
Do not use oil or grease on the door
seal.
 The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dust
brush, for example).
74

After cleaning

 Replace all shelves and accessories
in the appliance.
 Switch the refrigeration appliance
back on, if necessary.
 If you have activated the refrigerator
section's Cleaning mode :
Touch the OK sensor control on the
control panel.
 will appear in the display.
 Touch OK.
When Cleaning mode  is switched
off, the dot in the upper corner of the
display disappears.
 Use the  and  sensor controls to
scroll to the  symbol and touch OK.
The refrigerator section will start cooling
again.
 Switch the SuperFrost  function on
for a while so that the freezer section
can cool down quickly.
 Switch on the Automatic SuperCool
function  for a while so that the re-
frigerator section can cool down
quickly.
 Place food in the refrigerator section.
 Once the temperature in the freezer
section is cold enough, you can place
the food in the freezer drawers and
return the drawers to the freezer.
 Switch off the SuperFrost  function
as soon as the temperature in the
freezer section is a constant 0°F
(-18°C) or colder.
 Close the appliance doors.