Miele KFN 7734 D Operating Instructions Manual page 26

Installation
A 27 3/8" (695 mm)
B 9/16" (15 mm)
C 24 3/4" (629 mm)
D 38 15/16" (989 mm)
E 70 3/8" (1788 mm)
F approx. 1/8" (3 mm)
G 3/4" (19 mm)
1-4
Calculating the height of the cabinet
doors
These examples are based on the fol-
lowing measurements, which may vary
depending on the design of the kitchen:
- The horizontal gap between cabinet
doors  and  is F = approx.
1/8" (3 mm). This gap must be within
the hatched area (see drawing).
- The thickness of the cover panel 
and the base  of the fitted unit is
usually 3/4" (19 mm).
26
– Height of freezer section cabinet
door 
1. The freezer section cabinet door
must be at least A = 27 3/8"
(695 mm) to cover the bottom section
of the appliance.
2. To cover the front of the cabinet floor
panel , add the height of the cabi-
net base to height A:

= A + G = 28 1/8" (714 mm).
min 4
3. The height of the cabinet door may
need to be altered depending on the
adjacent kitchen units:

= A + G + D - 1/8" (3 mm)
max 4
= 28 9/16'' (726 mm).
– Height of refrigerator section cabi-
net door 
This height is calculated on the basis of
the freezer section cabinet door 
height:
1. Height of freezer section cabinet
door =  :
max

= A + G
min 3
1/8" (3 mm)
= 43 3/16" (1097 mm)
2. Height of freezer section cabinet
door =  :
min

= A + G
max 3
1/8" (3 mm)
= 43 11/16" (1109 mm)
- 
+ G -
4 max
- 
+ G -
4 min