Table of Contents
Advertisement
Cleaning the machine front
and the side panels
If soiling is allowed to sit for any
length of time, it may become im-
possible to remove. Surfaces may
become discolored or damaged.
It is therefore best to remove soiling
from the appliance front and side
panels immediately.
All surfaces are easily scratched.
Contact with unsuitable cleaning
agents can alter or discolor the sur-
faces.
See the information on "Cleaning
agents" at the beginning of this sec-
tion.
Clean the surfaces with a clean
sponge and a solution of warm water
and liquid dish soap. A clean, damp
microfiber cloth without cleaning
agent can also be used for cleaning.
After cleaning, wipe with clean water
and dry with a soft cloth.
Cleaning and care
Appliance front
The appliance front has a special high-
quality finish (Clean Touch Steel). This is
resistant to soiling and is very easy to
clean.
Do not use stainless steel
cleaning agent on these surfaces,
as it will damage the finish.
Do not use Miele stainless steel
conditioning agent on these sur-
faces, as it will cause noticeable
smearing.
Cleaning the door seal
If the door seal is damaged or has
come out of the groove, the door will
not close properly and this will affect
cooling. As a result, condensate will
build up in the interior cabinet and
this can cause a build-up of ice.
Do not damage the door seal, and
make sure that it does not come out
of its groove.
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water and then
wiped thoroughly dry with a cloth.
57
Advertisement
Table of Contents
