Table of Contents
Advertisement
Kaden Installer's Manual
Ducted Gas Heaters
SCOPE
This Installer's Manual is intended to be used as a guideline for the installation of Kaden Gas Fired Central
Heaters. It covers only the installation and commissioning of the heater and the allowable flueing configurations.
Although recommended return air grilles and allowable duct outlet quantities are specified, it does not cover the
actual ducting design required to suit the installation.
This Installer's Manual is based on Australian codes – for all other applications, please refer to local codes and
regulations.
Kaden heaters must be installed and serviced by qualified personnel.
Models covered in this manual are as follows:
Kaden Universal Heaters
KUN5 Series
KUN4 Series
KUN3 Series
Kaden External Heaters
KEX4 Series
KEX3 Series
All Kaden models are Natural Gas ONLY.
All Kaden models are non-condensing.
NOTE
Universal models may be used in both internal & external applications.
For more details refer to "11. Technical Specifications" on page 41
6
KUN521
KUN530
KUN415
KUN420
KUN425
KUN430
KUN315
KUN320
KUN325
KUN330
KEX415
KEX420
KEX428
KEX315
KEX320
KEX328
Networker
KUN5 & KUN4
Type of Wall Control (Thermostat) Supplied
Kaden Networker
Kaden Networker
Kaden Manual
Type of Wall Control (Thermostat) Supplied
Kaden Manual
Kaden Manual
Manual
KUN3, KEX3 & KEX4
Advertisement
Table of Contents
