Table of Contents
Advertisement
Output voltage abnormal
Output short circuit
Output overload
PV over voltage
5.2 Solutions
Faults
Battery over voltage
Battery over discharge
Battery overheating
Device overheating
Output overload
Output short circuit
Check whether the battery voltage is too high and disconnect the PV modules.
Waiting for the battery voltage to resume to or above LVR point (low voltage
reconnect voltage) or changing the power supply method.
When the battery temperature declines to the overheating recovery temperature
or lower, the inverter/charger will resume working.
When the device temperature declines to the overheating recovery temperature
① Please reduce the number of AC loads.
or lower, the inverter/charger will resume working.
② Restart the device to recover the load output.
① Check carefully loads connection, clear the fault.
② Restart the device to recover the load output.
flashing
Inverter fast
--
flashing
Inverter fast
--
flashing
Inverter fast
--
flashing
PV charge fast
--
flashing
Solutions
46
Alarm
On Solid
Alarm
On Solid
Alarm
On Solid
Alarm
On Solid
Advertisement
Table of Contents
