7
Setup the Machine and the Computer
Install the Software
If the Found New Hardware or Found New
Hardware Wizard screen appears:
1
Remove the USB cable connected to
your computer.
The screen may close. In this case, proceed
from
.
2
Click Cancel to quit the screen.
3
Proceed from
.
1
(A)
(B)
Press the ON button (A) to TURN
OFF THE MACHINE.
•
Operating noise continues for about
30 seconds until the machine turns off.
Make sure that the POWER lamp (B)
stops flashing.
Windows
2
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM drive.
The setup program should run automatically.
Windows Vista
Go to Step
Windows XP/
Go to Step
2000
•
If the program does not start
automatically, double-click the CD-
ROM icon on the computer. When the
CD-ROM contents appear, double-click
MSETUP4.EXE.
A
C
E
.
G
.
I
J